| Chassis | |
|---|---|
![]() | |
![]() |
The chassis of the ROVER 8hp 'Eight' is a quite simple construction. The picture on the left was taken from the exhibition report of the magazine 'The Motor' from November 1919. |
![]() | |
| Rear Axle | |
![]() |
Power is transmitted to the rigid rear axle by means of a spiral or worm drive at the bottom. The axle is guided via the two semi-elliptic springs, no damping is provided. |
![]() |
![]() |
| Air-cooled Engine | |
![]() |
![]() |
| The air-cooled engine has first 998 ccm, later it is amplified by longer stroke to 1135 ccm. | ![]() |
![]() | |
![]() |
![]() |
There is a small video on YouTube about the engine, which you can watch ⇒ here.
© 2021-2025 by ROVER - Passion / Michael-Peter Börsig